Your Makita polisher is a strong tool made to give great results. However, like any other tool, it needs proper care to keep working well. Taking care of your polisher helps it run smoothly and last longer. In return, it saves you both time and money. Whether you're polishing a car, boat, or other surfaces.
These easy Makita polisher maintenance tips will help you keep your polisher in good shape for many years.
1- Clean It After Every Use
When you use your polisher, it collects dust and dirt. If you don’t clean it after you're done, all that dirt can block the air vents and make the motor work too hard. Never use water to clean your tool. Moisture is a major enemy for electric polishers.
Here’s what you should do:
-
To eliminate dust and dirt from the outside of the polisher, wipe it off with a dry towel.
-
Use a can of compressed air to remove dust from the little vents and around the switches.
- If you’ve been using a lot of polish, such as Sea-Shield Coatings, check the polishing head carefully and clean off any buildup.
Inspect Pads, Plates, and Cords
Before and after every use, do a quick check whether:
-
The foam pad wore out.
-
The backing plate is still perfectly flat
-
Are there any cuts or frays in the power cord?
Replacing small parts early can save you from bigger and more costly repairs later.
2- Store It In The Correct Manner
How you store your polisher is the most important part. If you just throw it in a corner of your garage or leave it outside in the sun, it can get damaged and won’t last as long.
Here’s what you should do for proper polisher storage:
-
Keep it in a dry, cool place where it’s safe from heat and moisture.
-
If you have a padded bag or the case it came in, use that to protect it.
-
Don’t wrap the power cord too tightly around the machine. It can damage the wires inside.
3- Don’t Avoid Minor Repairs
If your polisher starts making odd noises, overheating, or feeling less powerful, don't wait for it to quit completely.
Here’s some quick polisher repair advice:
-
Check the carbon brushes. They wear out over time and are also cheap to replace.
-
Watch out the switch for dirt or damage.
-
Check the backing plate; if it seems twisted or damaged, replace it immediately. A damaged plate can make the polisher shake or scratch surfaces.
Catching small issues early keeps your Makita buffer working like new and prevents expensive repairs.
4- Don’t Push Too Hard
Makita polishers are already very strong. Hence, you don’t need to press down hard when using them. If you push too much, it might result in the following:
-
The motor has to work harder than it should.
-
The surface you’re polishing might look uneven or messy.
-
The polisher can break or wear out faster.
Instead, to extend the polisher's lifespan just hold the polisher lightly and let it do the work for you. This way, you’ll get better results and your arms won’t get tired either.
Final Thoughts
Maintaining your Makita polisher doesn’t have to be complicated. With regular cleaning, smart storage, and quick repairs, you can get better results on every project. Whether you're just starting with it or using it for a very long time, Sea-Shield Coatings for boat polish, these tool maintenance tips will keep your equipment better and safer.
Don’t wait for your Makita polisher to break down. Start maintaining it now. Need high-quality polishing products? Shop now for premium accessories and Sea-Shield Coatings for flawless finishes on your boat, car, or any surface.
